Tory Whips Say Commons Defeat 'no Big Deal' Despite 'underestimating Brexit Unity'

After inflicting their stunning Commons defeat on Theresa May, many of the 11 Tory MPs who voted against the Government headed for the Pugin Room, the most genteel of all Parliaments many watering holes.The Parliamentary website calls it "an idyllic setting with wonderful views of the Thames". A large gilt brass and crystal chandelier dominates the room and there are big shields painted with coats of arms.

How appropriate then, that these reluctant Brexit rebels should head there. For this was a genteel rebellion. Many of the 11 MPs were first-time rebels and all claimed to have voted against their party with a heavy heart.

The Pugin Room plotters included their leader Dominic Grieve and fellow rebels Nicky Morgan, Anna Soubry, Bob Neill and Stephen Hammond, who minutes earlier had been sacked by Chief Whip Julian Smith from his post as a Tory vice-chairman.They took over the table by the enormous window. But this was no Champagne celebration, just modest glasses of the House of Commons sauvignon blanc.

"It wouldn't have been appropriate," said one of those present.A group of Government whips, meanwhile, headed for the much more raucous and bawdy All-Party Parliamentary Beer Group Christmas reception in the marquee on the House of Commons terrace. Drowning their sorrows perhaps"It's no big deal," one of these terrace tipplers claimed.

ReallyDespite Government attempts to play down its significance, the defeat has left a bitter taste. And not from the Ilkley pale ale being served to the revellers in the terrace marquee.During the debate on day six of the committee stage of the EU (Withdrawal) Bill, there was real rancour on the Tory benches as old battles were being re-fought between Eurosceptic and pro-EU Conservative MPs.

The Eurosceptics turned on Ken Clarke, the most pro-European of all pro-Europeans, calling him a federalist, an insult which he angrily denied.Then the pro-Europeans turned on Bernard Jenkin as he did battle with some of the MPs who would later go into the Aye lobby with Labour, Lib Dem and Scottish and Welsh Nationalist MPs.After Mr Jenkin told the rebels it was "not the moment to defeat the Government" with a European Council summit due the next day, Anna Soubry shouted at him: "From you!

From you!"Clearly, some old scores were being settled. Remember that Mr Jenkin, Iain Duncan Smith and Sir Bill Cash were prominent among the Maastricht rebels who were the scourge of John Major's government in the 1990s.

Mr Grieve's groovy gang were supported by the pro-European Labour MP Chuka Umunna, who had clearly been doing some research in the Commons library on past Tory rebellions by Eurosceptics.Among the current Cabinet, David Davis had rebelled more than 90 times, he revealed. Liam Fox had defied his party 19 times, Penny Morduant five times and Andrea Leadsom seven times.

On the Tory backbenches, Mr Umunna said, John Redwood had voted against his party 73 times, John Baron 64 times, Mr Jenkin 95 times and Sir Bill more than 100 times.After the vote, Nadine Dorries, who has voted against her party 47 times, said the rebels should be deselected and Mr Grieve stripped of his paid post as Intelligence and Security Committee chairman."None of these people can now lecture people who are seeking to do the right thing in the national interest on this amendment, none of them can lecture them about rebelling on this or any other matter," said the Labour remainer.

During the voting, some old fashioned whipping was applied by the Government. Philip Hammond, the Chancellor, was witnessed dragging new Tory MP Vicky Ford through the No lobby.Gavin Williamson, the Defence Secretary who was Chief Whip until six weeks ago, was seen giving new Scottish Tory MP Paul Masterton a hard time on the green benches.

Once a whipEarlier it was reported that whips had been accused of reducing a female MP to tears. A male whip was alleged to have used "bully boy tactics" that left the MP trembling and crying in the Commons.But one reason the Government lost the vote was that they underestimated a sudden outbreak of unity on Brexit among Labour MPs.

Only two Labour Eurosceptics, Kate Hoey and Frank Field, voted with the Government this time.And here is a twist. The veteran Dennis Skinner, 85, and his pal Ronnie Campbell, 74, claim they swung the vote against the Government.

Both fierce Eurosceptics ("the Beast of Bolsover" still calls the EU "the Common Market"), they have until now voted with the Government on Brexit.But this time the left-wing duo, who always sit together on the front row below the gangway in the Commons, decided during the debate to switch sides and support their own party, no doubt sensing that the vote was going to be close.If they had voted the other way, the result - a margin of just four votes - would have been a tie and the chair would have voted for the status quo and against Mr Grieve's amendment.

So the roar of the "Beast" was decisive. Although Mr Skinner would not be seen dead in the genteel surroundings of the Pugin Room. And definitely not with Tory MPs.

sin datos
Artículos recomendados
What Sound Bursts Your Bubble?
Alley cat! The cat that's always in New York backstreets or other scary urban areas.Shop door bell is also one of those sounds...I live in Sweden and some studios here are just plain lazy and choose whichever sample is the closest. So it turns out that every door and every shop has the same sound.And there is also abuse of an owl sound here in Sweden whenever we show images of dark forests there the certain "hoot hoOOot" and it just... well. Much like the loon. There's a great movie called "in a better world" or "hmnden" (the swedish title). The movie is danish so of course it's hyper realistic in acting and events. Everything "feels real" and it's a breathtaking movie, really stunned me. And it had its grip on me, I had been crying and had a real physical emotional experience of this movie and this freakin' owl just starts hooting! Why? Cause there's an image of a forest with a lake nearby. GAHSo even danish sound designers are lazy, it seems. Actually the sound of that movie in general was quite mediocre. :/ OT: But nonetheless a fantastic movie that I greatly recommend :)When enjoying media for entertainment purposes, what specific sounds shatter your suspension of disbelief?For me, it is the call of a loon. I grew up in Muskoka, which is a cottage district in Ontario. My ears prick up whenever I hear that bird song. I am immediately transported to memories of starry nights camping, or sitting on a dock at dusk.Yesterday, while watching 24 S01E02, I heard a loon call out in the Mojave desert. Maybe they migrate that far... maybe... but still - it made me chuckle.The biggest example of a bird song that ALWAYS cracks me up is approximately 3 minutes into Thriller by Michael Jackson."They're out to get you. Demons closing in on every side." CUE LOON.
Share the Design and Application of a Practical ATX Power Supply
1 Introduction to ATX power supplyThe switching power supply in early PC was dominated by at power supply. The output power of at power supply is generally 150 250W, with four outputs ( 5V, - 5V, 12V, - 12V). In addition, it also provides a PG (power good) signal to the main board. The disadvantage of at power supply is that it can not realize software shutdown by cutting off AC power supply. At present, with the popularity of ATX power supply, at power supply has faded out of the market.Intel introduced the popular atx2.01 power supply standard in 1997. Compared with at power supply, ATX power supply mainly increases 3.3V output voltage and a PS-on signal. Among them, the 3.3V power supply supplies power to the CPU using low voltage, which greatly reduces the power consumption of the motherboard circuit. 5V power supply, also known as auxiliary power supply, has 5V voltage output as long as 220V AC is plugged in. PS-on signal is the level signal provided by the motherboard to the power supply, which is used to control the output of other voltages of the power supply. The functions of software startup / shutdown and network remote wake-up can be realized by using 5V power supply and PS-on signal. When the PS-on signal sent by the motherboard to the power supply is low, start the power supply, and turn off the power supply when PS-on is high. The main technical indexes of ATX power supply are output power, safety standard (such as China's C CEE certification), electromagnetic interference (EMI) characteristics, "power failure" (PF, i.e. power failure) and delay time of "power normal" signal.The power of PC switching power supply must meet the needs of the whole machine and leave a certain margin. At present, PC is developing towards "green" energy-saving and environmental protection, and its power supply power is not the greater the better. Intel's new micro ATX standard stipulates that the PC power supply power is only 145W, and can even be reduced to 90W. ATX power supply has become the mainstream product of PC power supply.2 basic principle of voltage stabilizing circuit of magnetic amplifierThe basic principle of magnetic amplifier voltage stabilizing circuit in flyback switching power supply is shown in Figure 1. The output voltage uo passes through the sampling resistors R1 and R2 to obtain the sampling voltage UQ, which is connected to the inverting input end of the error amplifier, the in-phase input end of the error amplifier is connected to the reference voltage UreF, vdz is the regulator, and R3 is the bias resistance. The error amplifier compares UQ with UreF to generate error voltage ur, which is then connected to the right end of controllable magnetic saturation inductor L1 through diode VD3. VD1 is the output rectifier and VD2 is the freewheeling diode. C is the output filter capacitor. L2 is a magnetic bead used to suppress switching noise. U1, U2 and U3 represent the voltages at the left end of L1, the right end of L1 and the right end of VD1 respectively. The upper end of the primary side of the high frequency transformer is connected with the DC input high voltage U1, and the lower end is connected with the drain of the power switch MOSFET. The feedback signal obtained by the output voltage through the feedback circuit is used to adjust the pulse duty cycle of the PWM modulator. The purpose of voltage stabilization can be achieved by changing the on and off state of the MOSFET.When the MOSFET is turned on, the energy is stored in the high frequency transformer, and VD1 is cut off. When the MOSFET is turned off, the energy stored in the high frequency transformer is transmitted to the secondary side. At this time, VD1 is turned on, and the magnetic reset current Ig flows through L1 from right to left to reset L1. Since the direction of secondary winding current I2 is opposite to Ig, I2 must offset Ig before flowing through L2. This shows that the secondary side current changes from negative to positive, and then increases rapidly, so that L2 enters the magnetic saturation state and presents low impedance. Obviously, the magnetic reset time is the delay time T1 when VD1 begins to turn on.The timing waveform of the magnetic amplifier is shown in Fig. 2 (a) and (b). The corresponding magnetic reset times are T1 and T2 respectively.It can be seen from the figure that changing T1 can adjust the duty cycle of U2: D = T1 / T, t is the switching cycle. Specifically, when the magnetic reset time is reduced from T1 to T2, D ↑ → uo ↑. Conversely, when the magnetic reset time increases from T2 to T1, D ↓→ uo ↓. Because the magnetic amplifier has the function of "secondary voltage stabilization" (the primary voltage stabilization is completed by PWM modulator), it can accurately adjust uo and obtain high stable output voltage.
LG Will Push Cordless Stick Vacuum Cleaner with Charging Station
LG will announce a new cordless stick vacuum cleaner on CES 2021, which includes a charging station that can automatically empty the dust box before filling the battery. The charging station for automatic emptying robot vacuum cleaner has existed for some time, but the new cordzero thinq A9 kompressor is the first stick vacuum cleaner we see, which can completely and automatically remove the dust in the dustbin.This is the first work of the charging station when the cordless stick vacuum cleaner stops. It automatically sucks the compressed contents of the dustbin into the additional bag, although there is a switch to manually start the dustbin cleaning. After that, the charging process can begin. Other settings can be adjusted using the touch screen of the charging station.This vacuum cleaner provides one key control and is equipped with a 2-in-1 combination tool, a gap tool, a pet nozzle, a special nozzle for cleaning carpets, an accessory to turn the device into a mop, and includes a spare quick replacement battery, so that users can solve the cleaning work for a longer time without stopping to charge, The filter is removable and washable.LG did not give more information about A9 kompressor. It will make its debut at next week's CES virtual conference, but the existing models have cyclone dust collection system, HEPA filter, telescopic straw and support Wi Fi, which can be used with supporting applications. At present, there is no news about the price and supply.Editor ajx
I Have a Sony W810i Sell Phone and the Back Lights Dont Work, Can Anyone Tell Me How Could I Fix It
you've got a couple of options, send it back to SE and have them re-flash the phone or search their web page (or the internet in general) for the flash software and do it yourself. Hopefully this will solve the problem. As always, try basic trouble shooting first - like remove the battery and put it back in, perform a master reset on the phone -- all that good stuff. Good luck• Suggested Readingusing cell phone when your waiting at the traffic light when it is red.?You cannot use a cell phone while you are operating a motor vehicle. Stopped at a red light is still operating your vehicle. Once you park the car, you are no longer operating, and can make your call.Hand-free should be allowed (I can't find anything saying it's not). But when you go to court, it will come down to your word against the officer's. So make sure you have some type of proof other than just saying you were using hands-free.------The light on my cell phone (front screen) will not go off?Here you go...... With your flip open, you need to press Menu, then Settings or Tools, (might say Settings & Tools), then Phone Display, and you should probably be able to figure it out from there.Also, here's the manual for your phone in pdf format. Probably useful to save in your MyDocuments. ------My Phone and its problems?when bringing your uniden phone to where it belongs in the garbage, on your way out to the store to get a new cordless phone, remember that those pretty looking vtech phones belong in the garbage with the uniden phone...only get a panasonic phone...2.4 ghz is good unless you have wifi5.8 ghz is not as good as 2.4 but if you have wifi its good enough...DECT is the best... operates @ 1.9ghz, so provides best range, security, and battery life...------Which Phone Is Better Looking And Better At Quality? x?To be honest they're both Awful handsets to purchase, as they lackuseful connectivity features, such as 3G ( Video-call, Fast internet.)Speaker Phone, Voice Dialling etc..If I was you, I'd be better off purchasing an LG ViewtyIt is a touch phone :)With a 5 mega Pixel CameraStill a very stylish phone up to this dayIt has all the useful Multimedia functions, Bluetooth, 3G, MP3 player etc.. ------I'm a sprint customer.. What is the best phone to get?I love my M1 its awesome so I'm definately going to suggest that as well as the Fusic, Krzr, M610, or an 8400. I would stay as far away from a Razr as possible! I don't care how cool or nice looking they are SPRINTS RAZR IS CRAP! I know personally as well as the other phones I suggested, I have had personal experience with them all. Good Luck. Oh, I'd also suggest using Phonescoops phone finder here---> tmobile wing charger won't charge my phone, but the light on the charger turns on when it charges.?Check first to see if another Wing charger will charge the phone to confirm it's the charger, you should be able to do this at a retail T-Mobile store .. also check the charger on another Wing phone at the store .. don't let them 'convince' you it's the phone they may try to simply get you to get another phone.You need to confirm if it's the Wing's charger that will no longer take a charge or the phone itself.------how do you change the mood lighting on the nokia twist phone?Um well I'm sure you have to go into the phone's setting's or something. I do not have this phone but I am probably getting it this month. A lot of vids on youtube explain how to change the light. I know what your talking about-- it's the little ring thing in it right? Yeah... well look around youtube and stuff I'm sure you will find it. Let me know if you figured it out! Thanks :) Oh and I hope I helped you out a bit :).------HELP! My Samsung Black Jack 2 Screen Light Keeps Turning ON/OFF?I own a Samsung phone and it's pretty sturdy. But whenever my phone starts acting up I usually turn it off and then back on to see if the problem is fixed. If not, I try taking out the battery and see if that works. If nothing works you should go bring it to the store. If you have a warranty and your phone shows no signs of water damage i think they'll replace it for you------Does my cell phone light up before it rings because light travels faster than sound?No, and the answer isn't physics, it's the design of your phone's software. The software designer probably decided to tell you (using the light) that negotiations between the phone and the cell tower started, but the phone does not yet know whether it's a voice call or a text message, whether any cell tower has a good enough round-trip radio connection to support a call, and which tower has the best connection. Once that's all settled and decided, the phone makes a sound.------what kind of verizon phone should i get?The Palm Centro!! It's small enough to fit in your pocket, and it's very light. It does have a full keyboard. The battery can last long if you put the brightness on its lowest. Additionally, it's touch screen! If you want more bars in more places, switch to AT&T though.Answer mine? ------Is the LG KF350 (Ice Cream) a good phone?is that the slender slider? I surely have owned an lg chocolate and env in the previous they have been respectable with some minor touchscreen interface matters and undesirable battery existence yet these days they have been improving and a few modern fashions have cameras with exceedingly much 4 megapixels! so lg isn't unfavourable despite the fact that nokia has the area now no longer a concepts in the lower back of is ericssons and moto even samsung------Is there anyway I can fix my phone?This happened to my sidekick, maybe because it was the oldest one. If it's an old phone and they have new phones that are the same type but a newer version of it, they probably made a newer version to stop that and it may have had some other bugs that needed to be fixed. Try going to a radio shack or where you bought your phone, they may be a lot of help. I hope this answers your question!.------Light, money, phones.. This is urgent.. by tomorrow, first period.. :/?at the starting up--ibuprofen is advil, you do not favor a prescription for it. it is going to shrink the cramping yet might want to reason you to bleed heavier because like aspirin, it thins your blood. there is not something that speeds up a era. As a thoughts a s you feeling like your self and in no way feeling like you may leak, tampons and a panty liner are your staggering wager...the picture of the first individual responded------can electricity from a light or other source give you electolysis?Electrolysis is a reaction when an electric current is sent through a salt solution which causes gases or metals to be formed at the electrodes.I have no idea what "receiving electrolysis" means, but certainly any current caused by a cell phone or a light is not enough for any significant electrolysis to occur, even if you have a salt bath ready with the proper electrodes. In fact neither lights or cell phones will cause any current at all.I think he is deluded. Ask for proof..------how do you get your bluetooth connected to your phone???you have to turn the bluetooth option on and then pair it to the device, what kind of phone do you have???What model number? if you dont know take the back off, removed the battery and the model # is therefrom you device, press the phone or power key until the indicator is continueously lightedfrom your phone menu gotosettingsbluetooth select turn ongotodevices select search or findpair the deviceselect and connectthe pair code is 0000you will be connected at that point.------How do you connect a wifi device to your phone?You must use the Meross App and have it on the screen that tells you to connect to the light.  Then you connect your phone's wifi setting to the light's wifi signal.  After which you should ONLY access the Meross App to complete the process.  This is a pretty common configuration process for various accessories, but it can be a very confusing one for non-tech people.  Manual ------Why does my phone charger make a high frequency sound?Modern light weight phone chargers with universal voltage inputs use a high frequency switching supply. Normally the switching frequency is above the well above the normal range of human hearing. It's possible that the unit was dropped and you're hearing some noise from the ferrite transformer.It should still be safe to use. I wouldn't try opening it unless you are familiar with switching supplies. There can be high voltages inside.Don------What happened to my phone?you might want to take it to the retailer that sold it to you, maybe they can help. Try putting your phone in uncooked rice disassembled, it soaks the water out and leave it in for like a day or two. then try to blow it out with a hairdryer. also, if your phone company doesnt let you get a new phone, buy a tracfone and the grocery store,(until you can get a new one)hope i helped!------Help with my Razr phone...Its turned off but the lights stay on?well if its a t-mobel it most likely has a defect on it because ive had to return 3 razor phones and i know alot of people who also have done the same thingbut ive hade a razor that does that but its because it has charged to much and its realesing the exases energy out of the phonebut it can break like that so u shuld try to get an exschange------I dropped my verizon wireless samsung phone in a pool when I plug it in the red light shines how can I fix It?If you could take it completely apart and wash it down with circuit board cleaning solvent, then dry it out, it might work. But you don't have the tools or the solvent to do that.You might try checking with the phone manufacturer to see if they offer a repair service. But that might just cost more than a new phone. Dropping the phone in water is the main reason people pay for the Phone Insurance offered with most every service plan. Now you know!------was bored at decided to see if my phone could calculate how many km light would travel in 750 millio?It's 7 followed by 21 digits. The first several of those digits are the ones shown on the phone.The "e" stands for "exponent", and is simply telling you to move the decimal point 21 digits to the right.For instance, 4.392 e7 is the same as 43,920,000.(The more correct explanation is the e is short for "times 10 to the e power", but it's less confusing and just as correct to just think of it as a sign to move the decimal over that many places.)------what is the best phone to get when you want....?A better phone then the sidekick is the G1. I had the sidekick for 4 days,but came to realize it wasn't a good phone as I expected it to me. Internet sucked on it. I switched to the G1. It has a FREE myspace app, which you can access myspace easily. G1 has a ton of free apps though. Internet is fast on it. You can get unlimited web unlimited texting on it. Keyboard lights up and is excellent quality. Get the G1!!------random light on a moble phone?It prob tells you when the phones switched on, because posh phones have a standby mode and you can't see that they're on, so the LED comes on to tell you that it is!P.S. - Can i have you're phone? I NEED cool phone cuz my PDA broke, it's like 20 years old, and i'm only 11, so thats hardly suprising. On my Laptop i can play Tapica! YAY! But thats about it... Its only a Win 3.1
Need to Get My Computer Working!?
Have you tried clicking "Last Known Good Configuration (your most recent settings that worked)"? EDIT If none of that worked, it means that either your hard drive has failed or is about to fail. You need to replace it. If you need to get stuff off it , see if this works.Restart the computer and keep pressing "delete" to get to the bios screen. It's different for various motherboards, but probably under "Hard disk", turn off the SMART function. Save and exit. If it boots into Windows, start saving on to disk or memory, everything you want to save and keep or move it to a new hard drive. This drive is about to fail, do not waste any time!!! If it does not boot into Windows, the drive has already failed.— — — — — —Help computer not working please help?If the whole heat sink came off do not use the computer. There is CPU paste under the heatsink that is put on before the heat sink on. When the air hits that(after you took it off) it pretty much makes that paste useless. The thermal paste needs to be re-applied before you use the computer or else the CPU will overheat and you will fry your CPU. If it's under warranty, send it back. If it is not , take it to a local computer shop and tell them what happened and ask them to fix it. Hope this helps— — — — — —is my computer a good gaming computer?There a several submodels of the G71. It's unlikely that Fallout NV will run well, if at all on your computer— — — — — —Is this a good computer?It wont be used for gaming, I can tell you that much (unless you are talking about flash games or very old/low requirement games)— — — — — —Connect computer to HDTV wirelessly?It sounds like your hyperlinked product will work. I basically have a flat screen HDTV and I want to be able to sit--with my laptop on my lap--and view the computer on my TV wirelessly--as if it were the actual monitor.— — — — — —What could be wrong with the computer or router?change the cat 5e cable aka the cable that goes from the router to the computer— — — — — —Computer: the video stutters and there is a buzzing noise!?Make sure that the speakers are as far away from the monitor or the computer as reasonable. Speakers might be creating a magnatic field that will effect the moniter.— — — — — —Pcm and computerReason being is the '93 is an OBD1 computer and the '99 is an OBDII computer. Like they say above, you need the computer & wiring harness from the '99 to run the '99 motor.— — — — — —Can a gaming computer double as a studio computer?i would say yes because it is already a high end computer— — — — — —My computer won't turn on?i still think is the charger or the connection of the charger on the laptop but most likely is the charger why? you say well because you said that when you connected the charger to the laptop the battery icon did not change so it was not charging the charger getting hot is normal and the green light on it not always indicates if there is a problem with it, why did the laptop turned off after you left it alone? Because the battery died, it has no charge and the charger is not charging it. what about the windows was unable to start? it happens some times might have been just some kind of glitch that usually gets fixed just by restarting the computer now something you did not mention is if the light on the computer that indicates when the computer is charging or is fully charged turns on. (the one with the battery icon and the one with the connector icon i believe your laptop has them right below the track pad)do they turn on at all when you plug in your charger? if not then the problem is either the charger or the charger port on your laptop.— — — — — —Upgrading Computer?You should upgrade your RAM to at least 1GB, depending on what type of games you want to play you may soon find that 2GB is a better option. Expect to pay close to $200 for that much RAM though. A PCI Express x16 graphics card would work just fine for your machine. You have a ton of options here so try to find one that fits your budget. ASUS, EVGA, BFG are all good card manufacturers. If you wanted to go a step farther, you could also upgrade your processor to the 4000. This may give you a boost in speed and the chip is pretty reasonable at around $60. If you have never worked on a computer before, search online for some times prior to opening the case. You can destroy your system if you arent careful.
What Are the Functions of 245, 138, 4953, 5024 and Other Chips in LED Display
The functions of chips such as 24513849535024 in LED display screen are as follows:245 is used to control transceiver for input and output. Enhance the output driving ability of single chip microcomputer.138 is decoded, which can save ports. Because there are many pins used in the LED display screen, it can't be connected without decoding.The function of the 4953 is the line drive tube and the power tube. The current required for each display line is relatively large. To use the line drive tube, each 4953 can drive two display lines. 5024 is a 16 bit constant current LED driver, which can realize serial input and parallel output, and maintain the output current of each output pin 3-45ma.The output terminal withstand voltage is 17V, and multiple LEDs can be connected in series at each output terminal. The special driver chip for LED display screen refers to the driver chip specially designed for LED display screen according to the luminous characteristics of LED.The schematic diagram is as follows:The performance of driving IC determines the effect of LED display screen broadcasting, especially in the application of Maipu Guangcai small spacing LED display screen. In order to ensure the comfort of users using their eyes for a long time, low brightness and high ash have become a particularly important standard to test the performance of driving IC, making people's requirements for LED display screen driving IC more stringent. The LED display driving IC makes more effective use of the light board space of micro led ultra-small spacing display, and the high integration function can effectively reduce the cloth space and the number of components;In addition, in terms of picture quality performance, low brightness and high stability have always been the key to dominate viewing distance and display effect. The average constant current drive of a single color can be as low as 15ua, and the gray level level can reach 16bit, which makes the contrast and uniformity of the display picture more delicate, and can also achieve the effect of energy saving and low power consumption.Extended data:LED driver chips can be divided into general chips and special chips. The so-called general-purpose chip itself is not specially designed for LED, but some logic chips with some logic functions of Maipu brilliant LED display screen (such as serial parallel shift register). The special chip refers to the driver chip specially designed for LED display screen according to the luminous characteristics of LED. LED is a current characteristic device, that is, on the premise of saturated conduction, its brightness changes with the change of current, rather than by adjusting the voltage at both ends. Therefore, one of the characteristics of special chip is to provide constant current source.Constant current source can ensure the stable driving of LED and eliminate the flicker of LED. It is the premise for LED display to display high-quality pictures. Some special chips also add some special functions according to the requirements of different industries, such as brightness adjustment, error detection and so on.fqj
Why LED Industrial Flood Lights Make Perfect Sense for Garages
No commercial, industrial or residential parking garage is complete without proper lighting. While designers and building owners find many options that meet lighting requirements, exterior LED flood lights tend to provide the best overall value for a variety of reasons. When LED flood lights are installed, building owners can save money without cutting corners in regard to safety or lighting quality.Just as LED indoor flood lights do, outdoor designs created especially for garages offer a visually pleasing way to illuminate a space. Going beyond the aesthetic value, however, LED outdoor flood lights for garages and other dark-by-design installations are favored for the following reasons:· The designs offered — Parking garages can pose an especially big challenge in regard to lighting. There are LED outdoor flood lights, as commercial property owners will find, that are made especially for parking garages. These sleek, low profile exterior flood lights are meant to be placed as close to the ceiling as possible. The design of these industrial flood lights is set to deliver clearance for a diversity of vehicles that is likely to use a parking garage on any given day.· The energy savings — The best outdoor LED flood light will use about 75 percent less electricity than standard options, such as incandescent bulbs. This savings can add up big on monthly electric bills, meaning property owners can deliver safety and lighting to garage spaces without paying more than they should.· The longevity — When parking garages are used day and night with high volumes of traffic, changing out bulbs can be a real challenge for maintenance crews. LED industrial flood lights provide an advantage here. This type of lighting is known to have a tremendously longer functional life than other lighting options.· The safety — In addition to providing enhanced safety due to the illumination provided, the best outdoor LED flood light designs tend to operate without producing as much heat as other designs. That means these lights are safer by design by reducing combustion risk.Making sure parking garages are properly illuminated around the clock can pose a real challenge for property owners. LED flood light fixtures for outdoor use can provide the perfect solutions. LED flood lights created especially for garages offer cost savings, safety and sleek designs that fit this environment perfectly.ABOUT THE AUTHORKristen Myers is an entrepreneur in the field of commercial LED lights, and has vast knowledge about various types of commercial and industrial LED lighting solutions available in the market for various commercial applications. He recommends for commercial LED lighting solutions·RELATED QUESTIONWere can I get quality outdoor LED lighting for my landscape project?If short maintenance, eco friendly landscape lighting is a precedence for you, outdoor LED lighting is a ideal option for your landscape lighting design. LED landscape lighting offers the protection, security and artistic qualities as any other landscape lighting solution, but it also offers a concentrated ecological footprint and lower maintenance.You can emphasize the beautiful architecture of your home’s external or landscaping with tactically placed outdoor lighting by LV Lightings. While your options may seem endless, it’s significant to believe the role you want your outdoor lights to play. Will they be for security reasons, or for more ornamental purposes?Outdoor LED lightingmay be more luxurious up front than other options, but in the long run it will go easier on your wallet than other bulbs. From LV Lighting’s LED lights have a long life span and offer excellence lighting that is power efficient.Whatever options you settle on, you’re sure to find a extensive selection of charming and well-designed landscape lighting right here on LV Lightings.
sin datos
Contact us
  • Cel : +86 158-2024-2923
  • Tel(Fax) : +86 020-29835956
  • E-mail :
    Facebook : Torylight sandy
  • Twitter : @torylight sandy

  • Add : No.1, XinHe Industrial Park, Huadu
  • District, Guangzhou, CHINA
Whatsapp :
+86 158-2024-2923
Copyright © 2021 Guangzhou Tory Light Co., Ltd. | Sitemap